The Ultimate Handyman Trailer – Adam Taylor the Handyman
Name a tool. It’s in my hand in 5 seconds.
My Ultimate Handyman Trailer isn’t really a trailer. It’s a mobile tool retrieval system. I built it from the ground up with one thing in mind: efficiency. Everything — from what I keep on my body, to my handyman backpack, to where each tool lives — was designed so that the time I spend on your clock is as productive as possible.
On My Body
My tape measure, a ¼” and 5/16″ nut driver, a flashlight, and a T25 bit live on my belt every single day. A pencil tucked behind my ear. The basics are always on me before I ever open a door.
In My Backpack
This is my modern-day toolbox — it’s the first thing I grab on every job. My impact driver, a 7-in-1 screwdriver, level, flashlight, scratch awl, pliers, drill bits, stud finder, chisels, speed square, small pry bar, Allen wrenches, and more. There’s also a detachable pouch I can pull off and clip to my belt depending on what the job needs. The whole thing weighs 50 pounds easy.
Take a Look Inside the Trailer
What’s in the Side Door
This is my first stop on every job. This is where my backpack lives, plus my miter saw, leaf blower, 2.5-gallon air compressor, small shop vac. Three parts organizers cover screws, anchors, and electrical basics. The door itself holds the things I grab without thinking: WD-40, insect repellent, spare drill bits, tape measures, pencils. Everything within arm’s reach before I even step inside.
What’s on the Left Side
Custom bins line the top — all built by hand, all adjustable. They mostly contain battery-operated power tools: hammer drill, an additional impact driver, sanders, grinder, saws-all, jig saw, circular saw, track saw, every nailer you’d need, multi-tool, router, and more. Corded backups live here too. Below that, 23 hand-built drawers organized by category — caulks, tapes, drill bits, plumbing, electrical, sandpaper, socket sets, saw blades. Nothing shares a drawer that doesn’t belong together. A folding workbench and outfeed table tuck in here as well, so I’m never scrounging for a flat surface on the job.
What’s on the Right Side
Battery-powered table saw. Four parts bins covering machine screws, wood screws, misc hardware, and fasteners. A dedicated painting box. My 23-foot ladder — I call it the go-go-gadget ladder. Two folding sawhorses. A bottom bin with the big stuff: axes, shovels, brooms, pry bars. Scrap wood of various lengths runs across the very top. And down the center of the whole trailer, a clear 2-foot run for hauling full sheets of plywood, 2×4s, or whatever the job calls for.
THE REST OF THE ARSENAL
The nose of the trailer handles the heavy and the unexpected. Generator, chain saw, band saw, concrete nail gun, framing nail gun, drain snake, air hoses, extension cords, drop cloths, sprinkler repair supplies, a 20-foot chain, and spare leaf springs for the trailer itself — because I plan for everything, including things going wrong on the road.
Up in the roof rafters: clamps and dryer duct cleaning rods. The back doors carry a 4-foot ladder and rubber boots.
One trailer. Fully loaded. Ready for just about anything, before I even ring the doorbell. And yes — it’s also a rolling billboard. Hard to miss in your driveway.
You Asked. Here’s the Story Behind the Trailer.
Why did you build the Ultimate Handyman Trailer?
I got tired of working out of the back of my Sequoia — everything I needed was either at the bottom of a pile or still at home. The trailer also fits in my garage and gets locked up every night.
Is this your first Ultimate Handyman Trailer?
Nope. My first one got flooded in Hurricane Harvey — it was horrible. But I learned a lot from that first design and was able to make this one so much more efficient. For example, my go-go-gadget ladder is tucked in there and you’d never know it — a ladder capable of extending to 23 feet, completely hidden inside.
How many tools are in there?
Honestly, I don’t know. I’ve been accumulating them over 10 years. What I can tell you is every single one was selected to make me more efficient. My table saw is battery-operated — I can set it down right behind the trailer and get to work without lugging it to a power source. And I say this without exaggeration: I have a better selection of DeWalt tools than Home Depot.
Why a backpack instead of a rolling toolbox?
Because most of the time I’m in someone’s home and I’m not going to risk scratching their floors. Many homes have a second floor too — the backpack makes it much easier to get what I need where I need it. It also frees up my hands so I can carry a parts bin and a ladder, or whatever else the job calls for.
Do you carry different tools for different neighborhoods?
Sort of. The Woodlands opened in 1974, starting with Grogan’s Mill, and every era of construction since has its own quirks. An original-village home from the early days and a newer build in Creekside Park can need completely different approaches — older homes mean more surprises behind the walls, newer ones mean different fastener types and finishes. My Ultimate Handyman Trailer is stocked for just about everything. Whether I’m in Sterling Ridge, Cochran’s Crossing, or out in Shenandoah, I’ve got what the job calls for before I even ring the doorbell.
What tool do you use the most?
The one between my ears.
My Billing Structure (no surprises)
For customers in The Woodlands and Shenandoah, I charge $120 per hour plus a $50 service call fee — that covers my travel, insurance, and my fully stocked Ultimate Handyman Trailer. That puts the minimum at $170 for the first hour. After that, I bill in 15-minute increments, so you only pay for the time I’m actually working.
If materials are needed, I stop at the store on the way, show you the receipt, and add the exact cost to your invoice. What I paid is what you pay. Not a penny more.
Before I show up, make a full list — you’d be surprised how much I can knock out in an hour. See everything I do here.
Ready to Get Started?
During regular business hours I’m usually working in someone’s home. And when I’m on their clock, I want to be respectful of their time. And after business hours, I’m at home with my family. So unless you happen to call me when I’m between jobs, I typically don’t pick up my phone.
The best thing to do is shoot me a text with your name, village, and what you need, and I’ll get back to as soon as I can.
No matter what village you live in, I’ve got you covered.
Villages & Zip Codes Served:
77380: Grogan’s Mill, Town Center
77381: Panther Creek, Cochran’s Crossing, Shenandoah
77382: Alden Bridge, Sterling Ridge, Indian Springs
77384: College Park
77375 & 77389: Creekside Park